Table of Contents
Advertisement
Remove cleaning brush
Proceed as follows:
[583]
10.
[584]
Caution
There can be a high build-up of static charge when vacuuming the toner
spill.
Always use an industrial vacuum cleaner with a grounded suction tube, rub-
ber nozzle and filter set for fine dust. For large toner volumes (e.g. 1 bottle),
an explosion-proof industrial vacuum cleaner must be used.
11.
Clean the front outside insertion area with the vacuum cleaner.
12.
Inserting the cleaning brush on page
410
Chapter 9 Replacing expendables
If the insert taper is not secured,
pull out the cleaning brush by
hand.
411.
Advertisement
Table of Contents
