Table of Contents
Advertisement
Proceed as follows:
[374]
Caution
Do not vacuum around the developer roller, as you might vacuum up devel-
oper mixture.
When performing the following cleaning, only vacuum the specified parts.
[375]
9.
[376]
10.
[377]
11.
Clean the developer station.
Using a vacuum cleaner, vacu-
um toner, developer and paper
residue from the front suction
bar, on the felt and on the upper
cover of the developer station.
Push in the developer station by
the handle until it reaches the
stop point.
Disconnect the vacuum hose
from the rubber clip and insert
into the toner box until it reach-
es the stop point.
275
Advertisement
Table of Contents
