Table of Contents
Advertisement
Proceed as follows:
6.
Put on heat protection gloves.
[347]
Caution
There can be a high build-up of static charge when vacuuming the toner
spill.
Always use an industrial vacuum cleaner with a grounded suction tube, rub-
ber nozzle and filter set for fine dust. For larger toner quantities, the indus-
trial vacuum cleaner must be explosion-proof.
[348]
7.
[349]
Caution
There can be a high build-up of static charge when vacuuming the toner
spill.
Always use an industrial vacuum cleaner with a grounded suction tube, rub-
ber nozzle and filter set for fine dust. For larger toner quantities, the indus-
trial vacuum cleaner must be explosion-proof.
[350]
8.
9.
Put on heat protection gloves (if you are not already wearing them).
Clean fuser station
Clean the suction slots with a
brush and a vacuum cleaner.
Vacuum the cleaning belt of dirt
below the contact surface with
the fuser roller.
265
Advertisement
Table of Contents
