Table of Contents
Advertisement
Paper specifications
Paper specifications
General information
The paper should comply with the paper specification for continuous printing
systems (see
regulations in order to achieve higher availability of the printing system.
Non-compliance with the paper specifications can cause damage to the printing
system and may also result in the release of substances from the paper that can
contaminate the environment or have a detrimental effect on health. Océ Printing
Systems GmbH accepts no liability for such damages.
The printing system is designed to process a wide range of paper types. However, the
operational properties of the printing system and the print quality also depend on
factors such as:
Paper quality
Grammage
Moisture content
Dimensional stability
Smoothness, etc.
Before using new media, ensure that they comply with the paper specifications. If in
doubt, please contact the paper laboratory at:
Océ Printing Systems GmbH
SWS SI 4
Postfach 1260
85581 Poing
Germany
Paper types
All media that comply with the requirements of the electrophotographic printing
method can be used in all specified formats and paper weights.
Using other paper qualities may result in reduced operational results, lower
availability and possibly also higher usage of consumables and expendables.
Paper handling
The climate (temperature and relative humidity) of the storeroom and processing
room is of major importance in ensuring optimum paper processing. Unsuitable
conditions can, for example, give the paper an excessive curl, make it bumpy, or alter
its electrical resistance.
60
Chapter 3 Description of the printing system
Other documents on page
26) and must be stored according to climatic
Advertisement
Table of Contents
