Table of Contents
Advertisement
Clean the developer station.
Proceed as follows:
[370]
6.
[371]
7.
[372]
8.
[373]
Caution
There can be a high build-up of static charge when vacuuming the toner
spill.
Always use an industrial vacuum cleaner with a grounded suction tube, rub-
ber nozzle and filter set for fine dust. For larger toner quantities, the indus-
trial vacuum cleaner must be explosion proof.
274
Chapter 7 Cleaning the printing system
Turn the knob on the fan in
front of the developer station to
the left and swivel off the fan.
Disconnect the vacuum hose
from the toner box and attach to
the rubber clip above the fine
filter.
Pull the developer station out-
wards by the handle to the stop
point.
Advertisement
Table of Contents
