Table of Contents
Advertisement
Clean transfer roller
Attention:
Transfer roller cleaning for paper change
When changing from narrow to wide paper, make sure that the transfer roller is
cleaned because there may be toner residue on the transfer roller.
Note:
The transfer roller must be cleaned on a regular basis (min. after 500,000 printed
pages).
To clean the transfer roller
[136]
Proceed as follows:
1.
If the printing system has not yet stopped, click the 'Stop' button.
2.
Remove transfer roller on page
[337]
Caution
Do not allow water to enter the printing system.
Ensure that no water enters the printing system when cleaning the transfer
roller.
3.
Clean the removed transfer roller with a wet cloth.
4.
Dry the transfer roller carefully with a soft cloth.
5.
Install transfer roller on page
6.
To switch the printing system to the 'Ready' status, click the 'Ready' button
again.
419.
421.
Clean transfer roller
261
Advertisement
Table of Contents
