Synchronization - Barcode synchronization mark for unperforated paper
The area of the PTL mark is used in both printing systems for the upper protected
area (sub-menu <Paper> <Sheets> <Mark type> = <Synchronization mark>
<Protected areas>).
The areas are the same (E1 = E2).
Lower protected area (F1, F2)
The area of the PTL mark is used in both printing systems for the lower protected
area (sub-menu <Paper> <Sheets> <Mark type> = <Synchronization mark>
<Protected areas>.
The areas are the same (F1 = F2)
170
Chapter 6 Operating the printing system