Hummer H1 Service Manual page 735

11-16 Heating/Ventilation/Air Conditioning (HVAC)
CLIMATE CONTROL HEAD REPLACEMENT
Removal
1. Remove front console.
2. Remove screw attaching climate control head to support
plate side bracket (Figure 11-6).
3. Pull climate control head from behind support plate so that
it angles away from longer side bracket.
4. Pull climate control head from shorter side bracket.
FACE PLATE
AUXILIARY
HEAT-A/C
SWITCH
CLIMATE CONTROL
HEAD
SUPPORT PLATE
Figure 11-6: Climate Control Head Replacement
______________________
Installation
1. From behind support plate, angle climate control panel
behind shorter of two side brackets.
2. Push climate control head toward longer side bracket until
flush, then secure it with a screw.
3. Slide rear bracket onto back lip of climate control head.
4. Install front console.
®
CONSOLE