Hummer H1 Service Manual page 262

____________________________________________
®
Step
11
Replace PCM.
Is the replacement complete?
12 1. After the repair is complete, use the scan tool to
select "DTC," then "Clear Info" function.
2. Select "Specific DTC" and enter DTC "P0713."
3. Ensure the following conditions are met:
• TFT sensor indicates a voltage less than 4.92
volts for 50.5 seconds.
05745159
DTC P0713 Fluid Temperature Low (Cont'd)
Action
Transmission/Transfer Case
Value
__
Go to Step 12
__
5-63
Yes No
__
Repair veri-
fied, exit DTC
__ table.