Hummer H1 Service Manual page 360

___________________________________________
®
20. Remove mode fork
(Figure 5-98). Note position of sleeve for installation
reference. Do not disassemble fork assembly. Only the
fork pads are serviceable.
21. Remove snap ring that secures intermediate clutch shaft
on mainshaft (Figure 5-99).
MAINSHAFT
MODE
FORK
ASSEMBLY
Figure 5-98: Mode Fork and Sleeve Removal
05745159
and sleeve from mainshaft
MODE
SLEEVE
Transmission/Transfer Case
SNAP RING
Figure 5-99: Intermediate Clutch Shaft Snap Ring
Removal/Installation
22. Remove intermediate clutch shaft and tabbed thrust ring
from mainshaft (Figure 5-100).
THRUST RING
MAINSHAFT
Figure 5-100: Clutch Shaft Removal
5-161
INTERMEDIATE
CLUTCH
SHAFT
SNAP RING
INTERMEDIATE
CLUTCH SHAFT