Ashtray Replacement; Engine Access Cover - Hummer H1 Service Manual

______________________________________________________________________
10-20 Body

ASHTRAY REPLACEMENT

Removal
1. Pull front console away from dashpad to gain access to
ashtray frame tabs.
2. Pull ashtray receptacle out of frame (Figure 10-25).
3. Straighten frame tabs and remove frame.
Installation
1. Insert frame into opening on console and secure it by
bending tabs around opening.
2. Push ashtray receptacle into frame (Figure 10-25).
3. Install front console.
TABS
(AFTER BENDING)
Figure 10-25: Ashtray Mounting

ENGINE ACCESS COVER

Inner Engine Access Cover Flexible Latch
and Hold-Down Striker Replacement
Removal
1. Remove engine access cover.
2. Remove rivets and hold-down striker from body
(Figure 10-26).
3. Remove rivets and flexible latch from cargo floor.
Installation
1. Secure flexible latch to cargo floor with rivets (Figure 10-26).
2. Secure hold-down striker to body with rivets.
3. Install engine access cover.
Figure 10-26: Inner Engine Access Cover Latch
ASHTRAY
RECEPTACLE
Engine Access Cover Replacement
Removal
1.
ASH TRAY
FRAME
2.
3.
4.
FRONT
CONSOLE
TABS
(BEFORE
BENDING)
6-S10-122
FLEXIBLE
LATCH
HOLD-DOWN BRACKET
Figure 10-27: Engine Access Cover Replacement
FLEXIBLE
LATCH
CARGO FLOOR
Location
Remove console.
Unlatch flexible latches from keepers on engine access
cover hold-down brackets (Figure 10-27).
Unlatch engine access cover hold-down latches from
engine access cover hold-down strikers.
Turn ring studs and remove access cover.
RING STUDS
ENGINE
ACCESS
COVER
HOLD-DOWN LATCH
HOLD-DOWN STRIKER
AND KEEPER
BODY
HOLD-DOWN
STRIKER
®