Hummer H1 Service Manual page 588

________________________________________
®
SPLASH SHIELD SUPPORT BRACKET
REPLACEMENT
Removal
1. Remove locknut, washer, bolt, and washer securing splash
shield to bracket (Figure 9-125).
NOTE: Note direction of bolts for installation.
2. Remove two locknuts, washers, bolts, washers, and
bracket from frame rail.
Installation
1. Install bracket on frame rail with two washers, bolts,
washers, and locknuts. Tighten locknuts to 90 lb-ft
(122 N•m) (Figure 9-125).
2. Install splash shield on bracket with washer, bolt, washer,
and locknut. Tighten bolt to 15 lb-ft (20 N•m).
FRAME RAIL
Figure 9-125: Splash Shield Support Bracket
Replacement
05745159
SPLASH SHIELD
BRACKET
Axles, Suspension, and Frame 9-51