Hummer H1 Service Manual page 362

___________________________________________
®
O-RING
Figure 5-105: Sector Shaft Bushing and O-Ring
Removal
29. Remove bolts attaching front retainer to front case. Then
remove retainer by prying it loose with screwdriver
positioned in retainer slot (Figure 5-106).
RETAINER
Figure 5-106: Front Retainer Removal
30. Remove snap ring that secures input gear in bearing
(Figure 5-107).
31. Remove input gear and low range planetary as assembly.
Tap input gear with rawhide or plastic mallet to free it
from bearing.
05745159
SECTOR
SHAFT
BUSHING
FRONT
RETAINER
SLOT
Transmission/Transfer Case
32. Disassemble input gear and low range planetary as
follows:
a. Remove retaining ring that secures input gear in low
range planetary (Figure 5-108).
b. Remove lock ring and front thrust washer (Figure 5-109).
c. Remove input gear and rear thrust washer from low
range planetary (Figure 5-109).
SNAP RING
Figure 5-107: Input Gear Snap Ring Removal
RETAINING
RING
Figure 5-108: Input Gear Retaining Ring Removal
5-163
INPUT GEAR
INPUT GEAR
LOW RANGE
PLANETARY