Hummer H1 Service Manual page 516

_________________________________________________________
®
SPANNER
TOOL
J–7624
Figure 8-35: Adjuster Plug Removal
3. Remove thrust bearing retainer by prying it up and out at
raised point on retainer (Figure 8-36).
SPACER
RAISED SECTION
SCREWDRIVER
Figure 8-36: Adjuster Plug Thrust Bearing
Retainer Removal
4. Remove bearing spacer, thrust bearing and races, and O-
ring (Figure 8-37).
05745159
ADJUSTER PLUG
OF RETAINER
Steering System
STUB SHAFT
SNAP
DUST SEAL
BEARING
RING
STUB SHAFT
OIL SEAL
ADJUSTER
PLUG
INNER
RACE
Figure 8-37: Adjuster Plug Components
5. Remove stub shaft seal retainer.
6. Remove dust seal and oil seal (Figure 8-38). Use tool
J–6221 to remove seals.
TOOL J–6221
Figure 8-38: Stub Shaft Bearing Removal
7. Remove stub shaft bearing with tool J–6221 (Figure 8-38).
8-25
STUB
SHAFT
O-RING
THRUST
SEAL
BEARING
SPACER
OUTER
RACE
RETAINER
STUB
SHAFT
BEARING
ADJUSTER
PLUG
4-1-00