Horn Replacement - Hummer H1 Service Manual

______________________________________________________
®
HORN

Horn Replacement

Removal
1. Remove harness connectors and adapters from horn.
2. Remove nut and
(Figure 2-81).
NOTE: Overtightening horn mounting nut will distort the horn
bellows and result in an "off-key" horn tone.
Installation
1. Secure horns to mounting bracket with nuts.
2. Plug harness connectors and adapters into horns.
HORN
MOUNTING
BRACKET
Figure 2-81: Horn and Horn Mounting Bracket
Replacement
Horn Mounting Bracket Replacement
Removal
1. Remove two horns.
2. Remove bolts, washers, lockwashers, nuts, and horn
mounting bracket from airlift bracket (Figure 2-81).
Installation
1. Secure horn mounting bracket to airlift bracket with bolts,
washers, lockwashers, and nuts (Figure 2-81).
2. Install two horns.
05745159
horn from mounting bracket
NUT
HORN
ADAPTERS
HARNESS CONNECTORS
Electrical System 12-61
4-1-00