Hummer H1 Service Manual page 684

_____________________________________________________________________
®
Windshield Wiper Linkage Replacement
Removal
NOTE: Left and right side windshield wiper linkage replace-
ment procedure is the same. This procedure covers the left side.
1. Remove windshield wiper motor assembly.
2. Remove upper A-pillar trim.
3. Disconnect windshield wiper linkage from windshield
wiper pivot cranking lever pin and remove windshield
wiper linkage (Figure 10-109).
Installation
1. Secure windshield wiper linkage to windshield wiper pivot
cranking lever pin (Figure 10-109).
2. Install upper A-pillar trim.
3. Install windshield wiper motor assembly on windshield
assembly.
WINDSHIELD WIPER
LINKAGE
WINDSHIELD
ASSEMBLY
WINDSHIELD WIPER PIVOT
CRANKING LEVER PIN
Figure 10-109: Windshield Wiper Linkage
Replacement
05745159
Windshield Wiper Pivot Replacement
Removal
NOTE: Left and right side windshield wiper pivot replacement
procedure is the same. This procedure covers the left side.
1. Remove windshield wiper arm assembly.
2. Remove upper A-pillar trim.
3. Remove windshield wiper linkage from windshield wiper
pivot cranking lever pin (Figure 10-110).
4. Remove nut, washer, and rubber washer securing
windshield wiper pivot to windshield assembly and
remove windshield wiper pivot.
Installation
1. Secure windshield wiper pivot to windshield assembly
with rubber washer, washer and nut (Figure 10-110).
2. Secure windshield wiper linkage to windshield wiper
pivot cranking lever pin.
3. Install upper A-pillar trim.
4. Install windshield wiper arm assembly.
WINDSHIELD WIPER
ARM ASSEMBLY
WINDSHIELD
ASSEMBLY
WINDSHIELD
WIPER PIVOT
Figure 10-110: Windshield Wiper Pivot
Replacement
Body 10-57
WINDSHIELD
WIPER LINKAGE
WINDSHIELD WIPER PIVOT
CRANKING LEVER PIN