Hummer H1 Service Manual page 712

_____________________________________________________________________
®
Front Driver and Passenger Courtesy Light
Replacement
Removal
1. Carefully pry courtesy light from mounting bracket
(Figures 10-171 and 10-172).
2. Disconnect light from wiring harness.
WIRING
HARNESS
Figure 10-171: Front Driver Side Courtesy Light
Replacement
Installation
1. Connect courtesy light to wiring harness (Figures 10-171
and 10-172).
2. Snap light into mounting bracket.
COURTESY LIGHT
MOUNTING BRACKET
ELECTRICAL
CONNECTOR
COURTESY
LIGHT
Figure 10-172: Front Passenger Side Courtesy Light
Replacement
05745159
INSTRUMENT
PANEL
MOUNTING
BRACKET
COURTESY
LIGHT
Headlight Electrical Connector and
Grommet Replacement
Removal
1. Remove headlight and jumper harness.
2. Remove connector from grommet (Figure 10-173).
3. Remove grommet from headlight housing.
Installation
1. Install grommet in headlight housing (Figure 10-173).
2. Install connector in grommet.
3. Install jumper harness and headlight.
GROMMET
CONNECTOR
Figure 10-173: Headlight Electrical Connector
and Grommet Replacement
Body 10-85
HEADLIGHT
HOUSING