Auxiliary Seat - Hummer H1 Service Manual

Section 13 Accessories
____________________________________________________________
®

AUXILIARY SEAT

Auxiliary Seat Replacement
Removal
1. Release and remove four locking pins from auxiliary seat
frame and auxiliary seat (Figure 13-59).
2. Remove auxiliary seat from auxiliary seat frame.
Installation
1. Install auxiliary seat on auxiliary seat frame.
2. Install and fasten four locking pins to auxiliary seat frame
and auxiliary seat. (Locking pins are properly installed
when balls near end of pins are visible.)
SEAT FRAME
LOCKING PIN
Figure 13-59: Auxiliary Seat
05745159
Auxiliary Seat Belt Replacement
Removal
1.
NOTE: Retain initial seat belt mounting positions during in-
stallation.
2.
AUXILIARY SEAT
Installation
1.
2.
Accessories
Release and tilt forward auxiliary seat.
Remove four bolts, washers, and two auxiliary seat belt
assemblies from auxiliary seat (Figure 13-60).
Figure 13-60: Auxiliary Seat Belt
Install two auxiliary seat belt assemblies on auxiliary seat
with four washers and bolts (Figure 13-60). Torque to 72-
78 ft-lb (98-106 N•m).
Tilt and fasten auxiliary seat back to normal position.
13-27
AUXILIARY SEAT
SEAT BELT
ASSEMBLY