Left Parking Brake Cable Replacement - Hummer H1 Service Manual

7-24 Brake System

LEFT PARKING BRAKE CABLE REPLACEMENT

Removal
1. Put transmission in PARK, chock wheels, and release
parking brake.
2. Remove cotter pin, washer, clevis pin, and brake clevis
from lever. Discard cotter pin (Figure 7-27).
3. Remove clip and cable sleeve from caliper cable bracket.
Discard clip.
4. Slide parking brake cable through parking brake cable
assembly. Remove clip securing cable sleeve to C-beam.
Disconnect parking brake cable from equalizer bar.
Discard clip.
5. Remove capscrew, washer, nut and lockwasher assembly
and washer securing clamp to mounting bracket and
parking brake cable assembly. Discard nut and lockwasher
assembly.
6. Remove capscrew, lockwasher, clamp, and parking brake
cable assembly from bracket. Discard lockwasher.
NOTE: Perform step 7 if clamp bracket is damaged. If not re-
placing bracket, proceed to installation. Note position of cable,
bracket, and clamp prior to removal.
7. Remove two capscrews and bracket from support bracket.
CLIP
EQUALIZER BAR
C-BEAM
PARKING BRAKE
CABLE ASSEMBLY
_____________________________________________________________
MOUNTING
BRACKET
BRACKET
CABLE
SLEEVE
Figure 7-27: Left Parking Brake Cable Components
Installation
NOTE: Perform step 1 if clamp bracket was removed. If not,
proceed to step 2.
1. Rotate bracket inward on support bracket and secure with
two capscrews (Figure 7-27).
2. Install clamp on parking brake cable assembly and bracket
with lockwasher and capscrew.
3. Install clamp on parking brake cable assembly and
mounting bracket with washer, capscrew, washer, and nut
and lockwasher assembly.
4. Install cable sleeve on C-beam and parking brake cable to
equalizer bar and secure with clip.
CAUTION: Ensure that the caliper cable bracket is secure
with no signs of looseness and the lever is in contact with the
caliper cable bracket stop. Damage to equipment and poor
performance will result if not aligned properly.
5. Install cable sleeve on caliper cable bracket with clip.
6. Install brake clevis on lever with clevis pin, washer, and
cotter pin.
7. Adjust parking brake lever.
PARKING BRAKE CABLE
CABLE SLEEVE
SUPPORT BRACKET
CLEVIS
PIN
CALIPER CABLE
BRACKET
CLIP
CALIPER
CABLE
BRACKET
STOP
LEVER
PARKING BRAKE CABLE
BRAKE CLEVIS
®