Hummer H1 Service Manual page 422

______________
®
COMPRESSOR/LOW PRESSURE INDICATOR
LIGHTS
Removal
1. Remove lower closeout panel and swing steering column
down.
2. Loosen center console and pull back to allow removal of
left crash pad.
3. Pull instrument panel back to gain access to the back of
the status centers.
4. Turn lamp one quarter turn, and remove lamps from
sockets.
05745159
Wheels and Tires/Central Tire Inflation System (CTIS)
BACKSIDE OF
INSTRUMENT PANEL
~
BULB
HOLDER
SPEEDOMETER
Figure 6-56: Compressor/Low Pressure Indicator Lights
Cleaning and Inspection
Clean and inspect indicator lamps for damage. Replace defec-
tive parts.
Installation
1. Install lamps in sockets and turn one quarter turn
(Figure 6-56).
2. Install instrument panel.
3. Install left crash pad and center console.
4. Install steering column and lower closeout panel.
5. Start engine, and operate CTIS system to ensure lamps and
switch operate properly.
STATUS
CENTER
6-39
STATUS
CENTER
9-S06-015 9-S06-015