Hummer H1 Service Manual page 642

_____________________________________________________________________
®
Crashpad Replacement (Right Side)
Removal
1. Remove screw/washers, and crashpad from dashboard
(Figure 10-16).
2. Disconnect air hose from vent duct.
3. Remove screws, side window vent, and vent duct from
crashpad.
Installation
1. Secure vent duct and window vent to crashpad with screws
(Figure 10-16).
2. Connect air hose to vent duct.
3. Secure crashpad to dashboard with screw/washers.
I. P. CLIPS
SIDE WINDOW
DEFROST VENT
AIR
HOSE
LEFT SIDE
STEERING COLUMN
MOUNTING BOLTS
MOUNTING BOLTS
Figure 10-15: Instrument Panel Replacement
DASHBOARD
I. P. CLIPS
CONSOLE
CRASH PAD
VENT
(LEFT SIDE)
Figure 10-16: Crashpad Replacement
05745159
RIGHT SIDE
MOUNTING BOLT
VENT
DUCT
AIR HOSE
DUCT
NOZZLE/
SIDE
WINDOW
VENT
CRASH PAD
(RIGHT SIDE)
Crashpad Replacement (Left Side)
Removal
1. Remove screw/washers from top of crashpad.
2. Tug gently on crashpad toward steering wheel to free
crashpad clips from I. P. clips (Figures 10-15 and 10-16).
3. Lift vent side of crashpad and work console side (duct
nozzle) out of front console.
Installation
1. Work console side (duct nozzle) of crashpad into front
console plenum.
2. Position crashpad on edge of I. P. closest to steering wheel
and push crashpad onto I. P. clips (Figures 10-15
and 10-16).
3. Secure crashpad to I. P. with screw/washers.
Body 10-15