Hummer H1 Service Manual page 694

_____________________________________________________________________
®
Soft Top Mounting Components and
Accessories Replacement
NOTE: The following
instructions include replacement of all soft top mounting com-
ponents and accessories. Use only the applicable steps for re-
placing specific components.
TONNEAU/REAR CURTAIN EXTRUSION
VELCRO PATCH
41 IN. (104 CM)
VELCRO STRIP
41 IN. (104 CM)
TONNEAU EXTRUSION
05745159
removal and installation
TONNEAU COVER
WOOD BOW
Figure 10-130: Tonneau Cover Wood Bow Removal
2 IN. (5 CM)
FROM EDGE
Figure 10-131: Velcro Strip and Patch Removal
Removal
1. Remove four-passenger soft top, tonneau cover, or station
wagon soft top, if applicable. Refer to the owner's manual
for proper procedure.
2. Remove tonneau cover wood bow from two retainer
brackets (Figure 10-130).
3. Remove four screws and two bow retainer brackets from
wheelhouses.
WHEELHOUSE
BOW RETAINER
BRACKET
VELCRO STRIP
WHEEL HOUSE
9 IN. (23 CM)
9 IN. (23 CM)
VELCRO STRIP
TONNEAU EXTRUSION
Body 10-67
TAILGATE CHAIN
ATTACHMENT CHANNEL
VELCRO PATCH
43 IN. (109 cm)
TONNEAU EXTRUSION
43 IN. (109 CM)
VELCRO STRIP