Hummer H1 Service Manual page 666

_____________________________________________________________________
®
UPPER
HINGE
PLATE
DOOR
LOWER
HINGE
PLATE
Figure 10-66: Door Hinges
Adjustment
1. Loosen twelve-point screws securing upper and lower
door hinges to pillar (Figure 10-66).
2. Raise door as high as possible. Push hinges toward front of
vehicle as far as they will go, and tighten twelve-point
screws 6 lb-ft (8 N•m).
3. Loosen twelve-point screws securing upper and lower
hinge plates to door.
4. Close door and tighten twelve-point screws.
05745159
Manual Window Regulator (Optional)
NOTE: At this point it is assumed that door panel has been re-
moved for access to window regulator.
Removal
UPPER
DOOR
1. Remove nuts and lockwashers securing regulator post to
HINGE
window assembly (Figure 10-67).
2. Remove screws and lockwashers securing regulator post
to door.
3. Remove screws, lockwashers and regulator from door.
PILLAR
DOOR
LOWER
DOOR
HINGE
REGULATOR
Figure 10-67: Window Regulator Mounting
Installation
1. Secure regulator to door with lockwashers and screws.
2. Secure regulator post to door with lockwashers and
screws.
3. Secure regulator post to window assembly with
lockwashers and nuts.
Body 10-39
WINDOW
ASSEMBLY
REGULATOR
POST