Hummer H1 Service Manual page 1048

____________________________________________________________
®
STAINLESS STEEL FRONT BUMPER COVER
(WITH WINCH)
Removal
1. Remove two bolts and the licence plate mount bracket
(See Figure 13-83).
2. Remove four bolts, washers and two tow bracket/lifting
shackle assemblies.
3. Support the winch and remove the bolts and washers
securing the bumper to the winch.
4. Pull the cover free from the bumper and clean the double
sided foam tape from the bumper and cover.
LICENCE
BRACKET
LIFTING
SHACKLE
Figure 13-83: SS Front Bumper Cover W/Winch
Installation
1. Clean all grease and dirt from the front bumper and cover
and prep the surfaces with alcohol.
2. Apply new double sided foam tape to the back of the cover
and press the cover on the bumper.
3. Install two tow bracket/lifting shackle assemblies, four
bolts and washers. Torque the bolts to 90 lb-ft (122 N•m).
4. Install the winch mounting bolts and washers and torque
to 60 lb-ft (81 N•m).
5. Install the licence plate mounting bracket with two bolts
and torque to 8-13 lb-ft (11-18 N•m).
05745159
FRONT
BUMPER
STAINLESS
COVER
TOW
BRACKET
STAINLESS STEEL REAR BUMPER COVER
Removal
1. Remove two bolts and the licence plate mount bracket
(See Figure 13-84).
2. Remove four bolts, washers and two tow bracket/lifting
shackle assemblies.
3. Remove the bolt covers from the bolt heads.
4. Pull the SS cover free from the bumper and clean the
double sided foam tape from the cover and bumper.
BUMPER
Figure 13-84: SS Rear Bumper Cover
Installation
1. Clean all grease and dirt from the front bumper and cover
and prep the surfaces with alcohol.
2. Apply new double sided foam tape to the back of the cover
and press the cover on the bumper.
3. Install two tow bracket/lifting shackle assemblies, four
bolts and washers. Torque the bolts to 90 lb-ft (122 N•m).
4. Install the licence plate mounting bracket with two bolts
and torque to 8-13 lb-ft (11-18 N•m).
5. Install the bolt covers on the bolt heads.
Accessories 13-43
SS COVER
LIFT
SHACKLE
ASSEMBLY
BOLT
COVER
9-S13-019