Lifting Shackle Replacement - Hummer H1 Service Manual

________________________________________
®

LIFTING SHACKLE REPLACEMENT

Removal
Remove cotter pin, slotted nut, bolt, spring washer, and shackle
from tiedown bracket. Discard cotter pin (Figure 9-119).
Installation
1. Install shackle on tiedown bracket with spring washer,
bolt, and slotted nut. Tighten slotted nut enough to allow
movement of shackle (Figure 9-119).
2. Install cotter pin in slotted nut.
Figure 9-119: Lifting Shackle Replacement
05745159
TIEDOWN BRACKET
SHACKLE
Axles, Suspension, and Frame
FRAME EXTENSION REPLACEMENT
Removal
1. Remove front bumper.
2. Remove hood and hinge (Section 10).
3. Remove two locknuts, washers, bolts, and washers
securing front suspension brace to frame extension
(Figure 9-120).
NOTE: Note position of winch cable bracket for installation.
4. Remove three locknuts, washers, bolts, and washers
securing clamp mounting bracket, frame extension, and
bumper mounting bracket to frame.
Installation
1. Install bumper mounting bracket, frame extension, and
clamp mounting bracket on frame with three washers,
bolts, washers, and locknuts. Do not tighten locknuts
(Figure 9-120).
2. Secure front suspension brace to frame extension with two
washers, bolts, washers, and locknuts.
3. Tighten all locknuts to 178 lb-ft (241 N•m).
4. Install hinge and hood.
5. Install front bumper.
FRAME
BUMPER
MOUNTING
BRACKET
FRAME
EXTENSION
Figure 9-120: Frame Extension Replacement
9-47
CLAMP MOUNTING
BRACKET