Hummer H1 Service Manual page 644

_____________________________________________________________________
®
Instrument Panel Switch Replacement
NOTE: All instrument panel switches are replaced similarly,
with the exception of the dimmer control switch. This proce-
dure covers the main light switch.
CAUTION: Some connectors can be installed incorrectly and
cause damage to the electrical system. Make note of connector
position prior to removal.
Removal
1. Remove closeout panel.
2. Reach up behind IP and push switch from switch housing.
3. Remove connector from switch (Figure 10-19).
Installation
1. Install connector on switch (Figure 10-19).
2. Install switch in switch housing.
3. Install closeout panel.
CONNECTOR
HOUSING
INSTRUMENT PANEL
Figure 10-19: Instrument Panel Switch Replacement
Instrument Panel Dimmer Control Switch
Replacement
Removal
1. Remove closeout panel.
2. Reach up behind instrument panel and push switch from
switch housing.
3. Unplug connector from wiring harness (Figure 10-20).
05745159
INSTRUMENT PANEL
Figure 10-20: Instrument Panel Dimmer Control
Installation
1. Plug connector into wiring harness.
2. Install switch in switch housing (Figure 10-20).
3. Install closeout panel.
SWITCH
WIRING HARNESS
HOUSING
SWITCH
Switch Replacement
Body 10-17
CONNECTOR