Front Suspension Front Crossmember - Hummer H1 Service Manual

9-60 Axles, Suspension, and Frame
SUPPORT BRACKET
AXLE
Figure 9-142: Side Mounting Bracket Removal
Figure 9-143: Support Bracket Replacement
SIDE
MOUNTING
BRACKET
CROSSMEMBER
SUPPORT BRACKET
SIDE MOUNTING BRACKET
_________________________________________

FRONT SUSPENSION FRONT CROSSMEMBER

REPLACEMENT
Removal
1. Remove front lower control arms.
2. Remove lower radiator hose.
3. Remove horn.
4. Remove radiator front mounting bracket.
5. Remove two nuts, washers, bolts, and washers securing
front crossmember to support bracket (Figure 9-142).
NOTE: Note direction of bolts for installation.
6. Remove four locknuts, washers, bolts, and washers
securing two splash shield brackets to frame rails
(Figure 9-144).
WARNING: To avoid personal injury, support cross-
member during removal.
7. Remove bolt and clamp securing harness to front cross-
member (Figure 9-145).
8. Remove four locknuts, washers, bolts, and washers
securing crossmember mounting brackets to frame rails.
9. Slide crossmember and mounting brackets down and out
from under vehicle.
10. Remove six locknuts, washers, bolts, washers, and left and
right mounting brackets from crossmember.
FRAME RAIL
Figure 9-144: Splash Shield Mounting
SPLASH SHIELD BRACKET
®