Intermediate Shield Replacement - Hummer H1 Service Manual

13-16 Accessories

Intermediate Shield Replacement

Removal
1. Remove six locknuts, washers, bolts, washers, and four
rubber washers securing two transmission support brack-
ets and intermediate shield to transmission mount cross-
member. Remove support brackets. Discard locknuts
(Figure 13-34).
TRANSMISSION
SUPPORT
BRACKET
RUBBER
WASHERS
Figure 13-34: Intermediate Shield
2. Remove locknut, washer, capscrew, and washer securing
left support bracket to engine mount bracket and frame
rail. Discard locknut (Figure 13-35).
3. Remove four locknuts, washers, bolts, washers, and left
support bracket from left mounting bracket. Discard
locknuts.
4. Remove locknut, washer, capscrew, and washer securing
right support bracket to frame rail. Discard locknut
(Figure 13-36).
5. Remove four locknuts, washers, bolts, washers, and right
support bracket from right mounting bracket. Discard
locknuts.
6. Remove two locknuts, washers, bolts, washers, spacers,
and intermediate shield from front crossmember and front
shield. Discard locknuts (Figure 13-37).
_____________________________________________________________
INTERMEDIATE
SHIELD
TRANSMISSION
MOUNT
CROSSMEMBER
Figure 13-35: Left Support Bracket
FRAME RAIL
RIGHT SUPPORT
BRACKET
RIGHT MOUNTING
Figure 13-36: Right Support Bracket
ENGINE
MOUNT
BRACKET
FRAME
RAIL
LEFT SUPPORT
BRACKET
LEFT MOUNTING
BRACKET
BRACKET
®