Hummer H1 Service Manual page 426

______________
®
CTIS INTERIOR HARNESS
NOTE: Prior to removal, tag all leads for installation.
Removal
1. Remove CTIS instrument cluster panel.
2. Disconnect connector from inflate/deflate and tire selector
switches (Figure 6-60).
3. Remove lamp from air pressure gauge.
4. Disconnect harness connector from I/P harness connector
and remove interior harness.
SCREW
AIR PRESSURE
GAUGE
05745159
Wheels and Tires/Central Tire Inflation System (CTIS)
CTIS INTERIOR
HARNESS
INFLATE/
DEFLATE SWITCH
Figure 6-60: CTIS Interior Harness Appearance
Cleaning and Inspection
Clean and inspect CTIS harness and connectors. Check for de-
fects such as frayed wires and cracks. Repair or replace defec-
tive parts.
Installation
1. Position interior harness in approximate mounting location
and connect harness connector to I/P harness connector
(Figure 6-60).
2. Install lamp in air pressure gauge.
3. Connect connector to inflate/deflate and tire selector
switches.
4. Install CTIS instrument cluster panel.
SWITCH
CONNECTORS
TIRE
SELECTOR
SWITCH
6-43
I/P HARNESS
CONNECTOR