Show Udld Configuration - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

show udld configuration

show udld configuration
Displays the global status of UDLD configuration.
show udld configuration
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
N/A
Examples
-> show udld configuration
Global UDLD Status
Global UDLD Mode
Global UDLD Probe Timer (Sec)
Global UDLD Echo-Wait Timer (Sec) : 8
Global UDLD Status : Disabled
output definitions
Global UDLD Status
Global UDLD Mode
Global UDLD Probe Timer
(Sec)
Global UDLD Echo-Wait
Timer (Sec)
Global UDLD Status
Release History
Release 7.1.1; command introduced.
page 2-12
: disabled,
: normal,
: 15,
Indicates the UDLD status on the switch. Options include enabled or
disabled.
Indicates the UDLD mode on the switch. Options include normal or
aggressive.
A probe-message is expected after this time period.
The detection of neighbor is expected with in this time period.
Indicates the UDLD status on the switch. Options include enabled or
disabled.
OmniSwitch CLI Reference Guide
UDLD Commands
March 2011