Ip Default-Ttl - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

ip default-ttl

ip default-ttl
Configures the Time To Live value (TTL) for IP packets. The TTL value is the maximum number of hops
an IP packet travels before being discarded.
ip default-ttl hops
Syntax Definitions
hops
Defaults
parameter
hops
Platforms Supported
OmniSwitch 10K
Usage Guidelines
This value represents the default value inserted into the TTL field of the IP header for datagrams originat-
ing from this switch whenever a TTL value is not supplied by the transport layer protocol.
Examples
-> ip default-ttl 30
Release History
Release 7.1.1; command introduced
Related Commands
show ip config
MIB Objects
IpDefaultTTL
page 10-16
TTL value, in hops. Valid range is 1–255.
default
64
Displays IP configuration parameters.
OmniSwitch CLI Reference Guide
IP Commands
March 2011