Show Ip Interface - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

IP Commands

show ip interface

Displays the configuration and status of IP interfaces.
show ip interface [name | emp | vlan vlan id]
Syntax Definitions
name
emp
vlan_id
Defaults
By default, all IP interfaces are displayed.
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
The basic show ip interface command displays information about all configured IP interfaces on the
switch.
•
Use the optional vlan parameter to display a list of interfaces configured for the specified VLAN.
•
Specify an optional interface name to display detailed information about an individual interface.
•
Use the optional emp parameter to display detailed information about the EMP interface.
Examples
-> show ip interface
Total 13 interfaces
Name
--------------------+---------------+---------------+------+-------+--------
EMP
GMRULE
Loopback
client
gbps
if222
ldap_client1
ldap_server1
radius_client3
vlan-2
gre-1
ipip-1
vlan-23
OmniSwitch CLI Reference Guide
The name associated with the IP interface.
Displays the configuration and status of the Ethernet Management Port
interface.
VLAN ID (displays a list of IP interfaces associated with a VLAN).
IP Address Subnet Mask
172.22.16.115 255.255.255.0
40.1.1.1 255.255.255.0
127.0.0.1 255.0.0.0
60.1.1.1 255.255.255.0
5.5.5.5 255.255.255.0
30.1.5.1 255.0.0.0
173.22.16.115 255.255.255.0
174.22.16.115 255.255.255.0
110.1.1.101 255.255.255.0
0.0.0.0 0.0.0.0
24.24.24.1 255.255.255.0
25.25.25.1 255.255.255.0
23.23.23.1 255.255.255.0
March 2011
show ip interface
Status Forward Device
UP NO EMP
DOWN NO vlan 40
UP NO Loopback
DOWN NO vlan 60
DOWN NO vlan 7
UP YES vlan 222
UP YES vlan 173
UP YES vlan 174
UP YES vlan 30
DOWN NO unbound
UP YES GRE tunnel
UP YES IPIP tunnel
UP YES vlan 23
page 10-97