Interfaces Ingress-Bandwidth - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

interfaces ingress-bandwidth

interfaces ingress-bandwidth
Configures the ingress bandwidth settings on a single port, a range of ports, or an entire Network Interface
(NI).
interfaces {slot| slot/port[-port2]} ingress-bandwidth {mbps| enable | disable}
Syntax Definitions
slot
port
port2
mbps
enable
disable
Defaults
parameter
enable | disable
Platforms Supported
OmniSwitch 10K
Usage Guidelines
N/A
Examples
-> interfaces 3 ingress-bandwidth enable
-> interfaces 3 ingress-bandwidth mbps 30
Release History
Release 7.1.1; command introduced.
Related Commands
show interfaces ingress-rate-
limit
MIB Objects
page 1-16
Slot number you want to configure.
Port number of the interface you want to configure.
Last port number in a range of ports you want to configure.
Speciifies the ingress bandwidth in mpbs.
Enables ingress bandwidth limiting.
Disables ingress bnadwidth limiting.
default
disable
Displays the ingress-rate-limit set for each interface por.
Ethernet Port Commands
OmniSwitch CLI Reference Guide March 2011