show spantree msti vlan-map
show spantree msti vlan-map
Displays the range of VLANs associated with the specified Multiple Spanning Tree Instance (MSTI).
show spantree msti [msti_id] vlan-map
Syntax Definitions
msti_id
Defaults
By default, the VLAN to MSTI mapping is displayed for all MSTIs.
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
If an msti_id is not specified, then the VLAN to MSTI mapping for all defined MSTIs is displayed.
•
This command is available when the switch is operating in either the per-VLAN or flat Spanning Tree
mode.
•
Initially all VLANs are associated with the flat mode CIST instance.
Examples
-> show spantree msti vlan-map
Cist
Name
VLAN list
Msti 1
Name
VLAN list
Msti 2
Name
VLAN list
-> show spantree msti 2 vlan-map
Msti 2
Name
VLAN list
output definitions
Cist Instance
Msti
page 5-112
An existing MSTI ID number.
:
: 1-9,14-4094
:
: 10-11
:
: 12-13
: MS1,
: 12-13
Identifies MSTI VLAN mapping information for the CIST instance.
The MSTI ID number that identifies an association between a Spanning
Tree instance and a range of VLANs.
Distributed Spanning Tree Commands
OmniSwitch CLI Reference Guide
March 2011