802.1AB Commands
lldp transmit hold-multiplier
Sets the transmit hold multiplier value, which is used to calculate the Time To Live TLV.
lldp transmit hold-multiplier num
Syntax Definitions
num
Defaults
parameter
num
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
The LLDP protocol must be enabled before using this command.
•
The Time To Live is a multiple of transmit interval and transmit hold multiplier.
Examples
-> lldp transmit hold-multiplier 6
Release History
Release 7.1.1; command introduced.
Related Commands
lldp transmit interval
show lldp local -system
MIB Objects
lldpConfiguration
lldpMessageTxHoldMultiplier
OmniSwitch CLI Reference Guide
The transmit hold multiplier value. The valid range is 2-10.
default
4
Sets the transmit time interval for LLDPDUs.
Displays local system information.
March 2011
lldp transmit hold-multiplier
page 9-3