Linkagg Lacp Port Partner Admin-Key - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

Link Aggregation Commands

linkagg lacp port partner admin-key

Configures the partner administrative key for a dynamic aggregate group port.
linkagg lacp port slot/port[-port2] partner admin-key partner_admin_key
no linkagg lacp port slot/port[-port2] partner admin-key
Syntax Definitions
slot
port
-port2
partner_admin_key
Defaults
parameter
partner_admin_key
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
Use the no form of this command to remove a partner admin key value from a slot and port or a range
of slot and ports associated with a dynamic aggregate group.
Examples
-> linkagg lacp port 2/1-5 partner admin-key 0
-> no linkagg lacp port 2/1-5 partner admin-key
Release History
Release 7.1.1; command introduced.
OmniSwitch CLI Reference Guide
The slot number for this aggregate.
The port that the switch initially uses as the Spanning Tree virtual port
for this aggregate.
The last port number in a range of port IDs.
The administrative key for the remote partner of a dynamic aggregation
group.
default
0
March 2011
linkagg lacp port partner admin-key
page 6-41