Ip Dos Scan Udp Open-Port-Penalty - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

IP Commands

ip dos scan udp open-port-penalty

Assigns a penalty value to be added to the Denial of Service penalty scan value when a UDP packet is
received on an open port.
ip dos scan udp open-port-penalty penalty_value
Syntax Definitions
penalty_value
Defaults
parameter
penalty_value
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
This command creates a point value that is added to the total port scan penalty value when a UDP
packet is received that is destined for an open port.
•
The switch does not distinguished between a legal UDP packet and a port scan packet.
Examples
-> ip dos scan udp open-port-penalty 15
Release History
Release 7.1.1; command introduced
Related Commands
ip dos scan threshold
ip dos trap
MIB Objects
alaDoSConfig
alaDoSPortScanUdpOpenPortPenalty
OmniSwitch CLI Reference Guide
A penalty value added to the penalty scan value. This value can be any
non-negative integer.
default
0
Sets the threshold for the port scan value, at which a DoS attack is
recorded.
Sets whether the switch generates SNMP DoS traps when an attack
is detected.
March 2011
ip dos scan udp open-port-penalty
page 10-89