IP Commands
clear arp-cache
Deletes all dynamic entries from the ARP table.
clear arp-cache
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
This commands only clears dynamic entries. If permanent entries have been added to the table, they
must be removed using the no form of the
•
Dynamic entries remain in the ARP table until they time out. The switch uses the MAC Address table
timeout value as the ARP timeout value. Use the
out value.
Examples
-> clear arp-cache
Release History
Release 7.1.1; command introduced
Related Commands
ip service
show arp
MIB Objects
alaIpClearArpCache
OmniSwitch CLI Reference Guide
ip service
mac-learning aging-time
Adds a permanent entry to the ARP table.
Displays the ARP table.
March 2011
command.
command to set the time-
clear arp-cache
page 10-71