Show Interfaces Capability - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

Ethernet Port Commands

show interfaces capability

Displays default auto negotiation, speed, duplex, flow, and cross-over settings for a single port, a range of
ports, or all ports on a Network Interface (NI) module.
show interfaces [slot | slot//port[-port2]] capability
Syntax Definitions
slot
port
port2
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
Displays defaults settings in two rows of data for each port. The first row of data, identified by the
label CAP, displays the valid user-defined configuration settings available for the port. The second
row, identified by the label DEF, displays the default settings for the port.
Examples
-> show interfaces 5/1 capability
Slot/Port AutoNeg
-----------+---------+--------+-----------+----------+----------
5/1 CAP EN/DIS
5/1 DEF
output definitions
Slot
Port
AutoNeg
Pause
OmniSwitch CLI Reference Guide
Slot number you want to display.
Port number of the interface you want to display.
Last port number in a range of ports you want to display.
Pause Crossover
EN/DIS MDI/X/Auto
EN EN Auto
The slot number.
The port number
In the row labeled CAP, the field displays the valid auto negotiation
configurations for the port. In the row label DEF, the field displays the
default auto negotiation settings for the port. The possible values are
EN (enabled) or DIS (disabled).
In the row labeled CAP, the field displays the valid pause configura-
tions for the port. In the row label DEF, the field displays the default
pause settings for the port.
March 2011
Speed Duplex
10/100/1G Full/Half
Auto Auto
show interfaces capability
page 1-31