Show Udld Status Port - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

show udld status port

show udld status port
Displays the UDLD status for all ports or for a specific port.
show udld status port [slot/port]
Syntax Definitions
slot/port
Defaults
By default, a list of all UDLD ports is displayed.
Platforms Supported
OmniSwitch 10K
Usage Guidelines
N/A
Examples
-> show udld status port
Slot/Port
--------------+------------------+------------------------
1/1
1/2
1/3
1/21
1/40
1/41
1/42
1/43
1/44
1/45
1/46
1/47
1/48
-> show udld status port 1/44
Admin State
Operational State
output definitions
Slot/Port
Admin State
Operational State
page 2-20
The slot number for the module and the physical port number on that
module (for example, 3/1 specifies port 1 on slot 3).
Admin State Operational State
disabled
disabled
disabled
disabled
disabled
disabled
enabled
enabled
enabled
enabled
enabled
enabled
enabled
: enabled,
: bidirectional
Slot number for the module and physical port number on that module.
Indicates whether UDLD is administratively enabled or disabled.
Indicates the state of interface determined by UDLD operation, which
can be notapplicable, shutdown, undetermined or bidirectional.
not applicable
not applicable
not applicable
not applicable
not applicable
not applicable
bidirectional
bidirectional
bidirectional
bidirectional
bidirectional
bidirectional
bidirectional
OmniSwitch CLI Reference Guide
UDLD Commands
March 2011