show interfaces ddm
show interfaces ddm
Displays the information for the specified transceivers.
show interfaces [slot| slot/port[-port1]] ddm [W-LOW W-HIGH STATUS A-LOW A-HIGH
ACTUAL]
Syntax Definitions
slot
num
port2
W-LOW
W-HIGH
STATUS
A-LOW
A-HIGH
ACTUAL
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
N/A
Examples
-> show interfaces transceiver W-Low
Slot/Port Temp C Voltage(V) Current(mA) Output(dBm) Input(dBm)
---------+------+----------+-----------+----------+---------+
1/1
48
1/2
47
1/3
NA
-> show interfaces transceiver A-High
Slot/Port Temp C Voltage(V) Current(mA) Output(dBm) Input(dBm)
---------+------+----------+-----------+----------+---------+
1/1
50
page 1-46
Display all the transceivers on the specified slot.
Display information for the specfied transceiver.
Last port number in a range of ports to display.
Display the transceivers Warning Low value.
Display the transceivers Warning High value.
Display the administrative status of DDM.
Display the transceivers Alarm Low value.
Display the transceivers Alarm High value.
The real-time values indicated by the transceiver.
parentheses indicate the Warning or Alarm value that has been
reached.
5.15
50
5.35
49
NA
NA
5.75
75
2.50
2.50
2.43
2.43
NA
NA
3.22
3.22
OmniSwitch CLI Reference Guide
Ethernet Port Commands
Values displayed in
March 2011