Clearing Udld Statistics; Verifying The Udld Configuration - Alcatel-Lucent OmniSwitch 9900 Series Network Configuration Manual

Configuring UDLD

Clearing UDLD Statistics

To clear the UDLD statistics, use the
statistics for port 4 on slot 1, enter:
-> clear udld statistics port 1/4
To clear the UDLD statistics on all the ports, enter:
-> clear udld statistics

Verifying the UDLD Configuration

To display UDLD configuration and statistics information, use the show commands listed below:
show udld configuration
show udld configuration port
show udld statistics port
show udld neighbor port
show udld status port
For more information about the resulting display from these commands, see the OmniSwitch AOS Release
8 CLI Reference Guide. An example of the output for the show udld configuration port and show udld
statistics port commands is also given in
OmniSwitch AOS Release 8 Network Configuration Guide
clear udld statistics port
Displays the global status of UDLD configuration.
Displays the configuration information for all UDLD ports or for
a particular UDLD port on the switch.
Displays the UDLD statistics for a specific port.
Displays the UDLD neighbor ports.
Displays the UDLD status for all ports or for a specific port.
"Quick Steps for Configuring UDLD" on page
December 2017
Verifying the UDLD Configuration
command. For example, to clear the
2-3.
page 2-8