Link Aggregation Commands
linkagg lacp agg name
Configures a name for a dynamic aggregate group.
linkagg lacp agg agg_num name name
no linkagg lacp agg agg_num1 [-agg_num2] name
Syntax Definitions
agg_num
-agg_num2
name
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
Use the no form of this command to remove a name from a single or a range of dynamic aggregate
groups simultaneously.
•
Assign names to individual dynamic link aggregate groups separately.
Examples
-> linkagg lacp agg 2 name finance
-> no linkagg lacp agg 2-5 name
Release History
Release 7.1.1; command introduced.
OmniSwitch CLI Reference Guide
The number corresponding to the dynamic aggregate group.
The last link aggregate ID in a range of link aggregate IDs.
The name of the dynamic aggregate group. Can be an alphanumeric
string. Spaces must be contained within quotes (for example, "Dynamic
Group 1").
March 2011
linkagg lacp agg name
page 6-13