Ip Router Primary-Address - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

ip router primary-address

ip router primary-address
Configures the router primary IP address. By default, the router primary address is derived from the first
IP interface that becomes operational on the router.
ip router primary-address ip_address
Syntax Definitions
ip_address
Defaults
N/A
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
The router primary address must be a valid IP unicast host address.
•
The router primary IP address is used by BGP to derive its unique BGP Identifier, if the router
router-id is not a valid IP unicast address.
•
It is recommended that the primary address be explicitly configured on dual CMM chassis.
Examples
-> ip router primary-address 172.22.2.115
Release History
Release 7.1.1; command introduced
Related Commands
ip router router-id
MIB Objects
alaDcrTmConfig
alaDrcTmIpRouterPrimaryAddress
page 10-10
32-bit IP address.
Configures the router ID for the router.
OmniSwitch CLI Reference Guide
IP Commands
March 2011