Distributed Spanning Tree Commands
spantree cist restricted-role
Configures the restricted role status for a port or a link aggregate of ports. Enabling this parameter blocks
the port from becoming the Root Port, even if it is the most likely candidate for root. Once a root port is
selected, the restricted port is selected as an Alternate Port.
spantree cist {port slot/port[-port2] | linkagg linkagg_id[-linkagg_id2]} restricted-role {enable |
disable}
Syntax Definitions
slot/port[-port2]
linkagg_id[-linkagg_id2]
enable
disable
Defaults
By default, the restricted role status for the port is disabled.
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
When running in flat mode, this is a per-port setting and is applicable to any CIST or MSTI instances
configured on that port.
•
Enabling the restricted role status is used by network administrators to prevent bridges external to the
core region of the network from influencing the Spanning Tree topology.
•
Note that enabling the restricted role status for a port may impact connectivity within the network.
Examples
-> spantree cist linkagg 15-20 restricted-role enable
-> spantree cist port 8/23 restricted-role disable
-> spantree cist port 8/24-27 restricted-role disable
-> spantree cist linkagg 10 restricted-role disable
Release History
Release 7.1.1; command introduced.
OmniSwitch CLI Reference Guide
The slot number and port number of the physical port. Use a hyphen to
specify a range of ports (4/1-8).
The link aggregate ID number. Use a hyphen to specify a range of IDs
Enables the restricted role status for the specified port.
Disables the restricted role status for the specified port.
March 2011
spantree cist restricted-role
page 5-63