Erp-Ring Enable - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

erp-ring enable

erp-ring enable
Enables or disables an ERP ring identified by the specified ring ID. This command applies to enabling or
disabling existing ERP rings.
erp-ring ring_id {enable | disable}
Syntax Definitions
ring_id
Defaults
By default, ERP rings are disabled when they are created.
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
The specified ring ID must already exist in the switch configuration.
•
Enabling a ring is also allowed at the time the ring is created.
Examples
-> erp-ring 1 enable
-> erp-ring 1 disable
Release History
Release 7.1.1; command was introduced.
Related Commands
erp-ring
show erp
MIB Objects
alaErpRingId
alaErpRingStatus
page 8-8
An existing ERP ring ID number. The valid range is 1- 2147483647.
Configures an ERP ring.
Displays the ERP ring configuration for the switch.
Ethernet Ring Protection Commands
OmniSwitch CLI Reference Guide March 2011