IP Commands
ip route-map match tag
Matches the tag value specified in the route map with the one that the routing protocol learned the route
on.
ip route-map route-map-name [sequence-number number] match tag tag-number
no ip route-map route-map-name [sequence-number number] match tag tag-number
Syntax Definitions
route-map-name
number
tag-number
Defaults
parameter
number
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
Use the no form of this command to delete the match tag parameter in the route map.
•
All route maps having the same name but different sequence numbers are linked together and
processed in order of increasing sequence number.
•
The route-map-name and sequence-number must exist before you configure this match criteria.
Examples
-> ip route-map route1 sequence-number 10 match tag 4
-> no ip route-map route1 sequence-number 10 match tag 4
Release History
Release 7.1.1; command introduced
Related Commands
ip route-map action
show ip route-map
OmniSwitch CLI Reference Guide
The name of the route map.
A number that links together the route maps. The range is 1–100.
The tag number.
default
50
Creates a route map for redistribution and sets the status of the route
map to permit or deny.
Displays the configured IP route maps.
March 2011
ip route-map match tag
page 10-41