Lldp Notification - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

802.1AB Commands

lldp notification

Specifies the switch to control per port notification status about the remote device change.
lldp {port slot/port[-port ] | slot slot | chassis} notification {enable | disable}
Syntax Definitions
slot/port
slot
enable
disable
Defaults
parameter
enable | disable
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
The LLDPDU administrative status must be in the receive state before using this command.
•
If this command is applied to a slot or chassis, then the existing configuration related to this command
is lost.
Examples
-> lldp port 1/2 notification enable
-> lldp slot 1 notification disable
Release History
Release 7.1.1; command introduced.
OmniSwitch CLI Reference Guide
Slot number for the module and physical port number on that module
(e.g., 3/1 specifies port 1 on slot 3).
The slot number for a specific module.
Enables the notification of local system MIB changes.
Disables the notification.
default
disable
March 2011
lldp notification
page 9-9