Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual page 668

show ipsec policy
1) esp
2) ah
Description:
Require AH and ESP headers on outgoing telnet traffic.
output definitions
Name
Source
Destination
Protocol
Direction
Action
State
Rules
Description
Release History
Release 7.1.1; command introduced.
Related Commands
ipsec policy
MIB Objects
AlaIPsecSecurityPolicyTable
alaIPsecSecurityPolicyName
alaIPsecSecurityPolicySource
alaIPsecSecurityPolicySourceType
alaIPsecSecurityPolicySourcePrefixLength
alaIPsecSecurityPolicySourcePort
alaIPsecSecurityPolicyDestination
alaIPsecSecurityPolicyDestinationType
alaIPsecSecurityPolicyDestinationPrefixLength
alaIPsecSecurityPolicyDestinationPort
alaIPsecSecurityPolicyProtocol
alaIPsecSecurityPolicyDirection
alaIPsecSecurityPolicyAction
alaIPsecSecurityPolicyOperationalState
alaIPsecSecurityPolicyRuleIndex
alaIPsecSecurityPolicyRuleProtocol
alaIPsecSecurityPolicyDescription
page 12-14
The name of the security policy.
Indicates the source of the traffic covered by this policy.
Indicates the destination of the traffic covered by this policy.
Indicates the protocol traffic covered by this policy. The protocol name
(TCP) or protocol number (80) is displayed in this field.
Indicates whether the policy has been applied to the incoming or outgo-
ing traffic.
Indicates the action to be taken on the traffic covered by this policy.
Indicates the operational state of this policy.
Indicates the rules specified for this policy.
The description for this policy.
Adds, modifies, or removes a security policy.
OmniSwitch CLI Reference Guide
IPsec commands
March 2011