Show Spantree Cist Ports - Alcatel-Lucent 060321-10, Rev. B Cli Reference Manual

show spantree cist ports

show spantree cist ports
Displays Spanning Tree port information for the flat mode Common and Internal Spanning Tree (CIST)
instance.
show spantree cist ports [forwarding | blocking | active | configured]
Syntax Definitions
forwarding
blocking
active
configured
Defaults
parameter
forwarding | blocking | active |
configured
Platforms Supported
OmniSwitch 10K
Usage Guidelines
•
This command displays Spanning Tree port information for the flat mode CIST instance regardless of
which mode (per-VLAN or flat) is active for the switch.
•
Note that minimal information is displayed when this command is used in the per-VLAN mode, as the
CIST is not active in this mode.
Examples
-> show spantree cist ports
Spanning Tree Port Summary for Cist
Oper Path
Port St Cost
-----+----+-------+-------+----+----+---+----+-----------------------+--------
1/1 FORW 200000
1/2 DIS
1/3 DIS
1/4 DIS
1/5 DIS
1/6 DIS
1/7 DIS
1/8 DIS
page 5-92
Displays Spanning Tree operational port parameters for ports that are
forwarding for the CIST instance.
Displays Spanning Tree operational port parameters for ports that are
blocked for the CIST instance.
Displays a list of active ports associated with the specified instance.
Displays Spanning Tree administrative port parameters for the CIST
instance.
default
all ports
Desig Prim. Op Op
Cost Role Port Cnx Edg
52 ROOT 1/1
0 0 DIS 1/2
0 0 DIS 1/3
0 0 DIS 1/4
0 0 DIS 1/5
0 0 DIS 1/6
0 0 DIS 1/7
0 0 DIS 1/8
Distributed Spanning Tree Commands
Desig Bridge ID
PTP EDG 8000-00:30:f1:5b:37:73
NS No 0000-00:00:00:00:00:00
NS EDG 0000-00:00:00:00:00:00
NS No 0000-00:00:00:00:00:00
NS EDG 0000-00:00:00:00:00:00
NS EDG 0000-00:00:00:00:00:00
NS EDG 0000-00:00:00:00:00:00
NS No 0000-00:00:00:00:00:00
OmniSwitch CLI Reference Guide
Note
March 2011